Car Rear Heated Window Defogger Repair Kit Demister Element Copper Paint Pen

Car Rear Heated Window Defogger Repair Kit Demister Element Copper Paint Pen

Easy To Use 
Permanent Repair 
Complete Kit 

Product Description:

Long-lasting and invisible repairs
Repair your vehicle's damaged defogger grids on your rear windows
Restores broken heated rear window elements
Fixes Splits and when one or more lines does not defog your rear glass.
Colour: Copper
 
Instructions:

Make sure you scrape a bit off both ends of your split line to expose the metal strip to allow the product to make a circuit. (You can do this with a small flat screwdriver).

1. Ensure the demister is turned off. Thoroughly clean the damaged area on the grid line using a alcohol wipe.
2. Carefully place the masking tape along either side of the damaged grid line.
3. Apply the copper repair pen between the gap in the masking tapes.
4. Make sure the copper repair paint overlaps both ends of the damaged grid line. Look through the window from inside the vehicle to ensure no light is showing through the repaired area. If light shows through apply another coat of repair compound.
5. Carefully remove the masking tape and allow the repair compound to dry before turning on the demister again.

Included:
1x Copper  Conductive Paint Pen

TIPS: 
Please shake the pen gently before using
And Keep it painting stably constantly and without interrupting
Natural air drying within 5-10 minutes
Best electrical conductivity when completely dry
The thickness of the paint film is not less than 20 micrometre
Keep away from your skins, fire, sun lighting, etc. 
Please close the cap after using

Painting materials: 
Cardboard, glass, ABS, PVC, PS, PC, HIPS and other plastics